SIGLOMAX TECHNOLOGY CO.,LTD

                            SIGLOMAX TECHNOLOGY CO.,LTD
                                                        

                   
        
Location: Home >>Products
   Product Category
FPV Racing
Multi-copter
Flight Control
Camera/Monitor
Gimbal Series
5.8G AV TX/RX
Airplane
Helicopter
Motors
ESC Series
Chargers
Propeller
Tools
Simulator
Plug&Wire
Spares 
2.4G TX&RX
Screw/Pillar
CNC Parts
Stock Clerance
XT60 Fuse Installation Test Safety Plug Short-circuit Protection Overld Inspng
Description
Product name:T60 Fuse Installation Test Safety Plug Short-circuit Protection Overload Inspecting
Product code:HSM-6125

Application: Model planes, cars, Boats. When assemble your models, it provides overload protection
Plug: XT60
Voltage range: 2-6S
Size: 44x17x12mm
Weight: 10.5g

Specs

l XT60

l 1-6s Capable(33v max)

l 0.5A Hold current,1A Trip Current

l 1.1A Hold current,2.2A Trip Current

l 0.5S Trip time

Usage

l Green led ok  

l Green led dim or blinking, Fuse tripped. 

l Red led error      

l Red led dim or blinking, Fuse tripped 

l Optional 0.5A Hold Current, 1A Trip Current

l Optional 1.1A Hold Current, 2.2A Trip Current

 

To reset the Solid State Smoke Inhibitor, unplug for 10 seconds.

 

 

 

Note: Solid State Smoke Inhibitor/ Lightbulbs / Fuses / Circuit breakers are not 100% foolproof way of keeping the magic smoke in. It’s always best to use in conjunction with a multimeter. This is NOT an end all be all kind of protection. Nothing is. It is best at protecting against a soldering short. If you wire something wrong, it will likely still blow (ie apply 16v to a 5v system). This is a failsafe, one that will probably help you but may not depending on the kind of error you make. Double check wiring schematics, check your gear with a multimeter, and lastly use a Smoke Stopper. Do not wire things up randomly and hope a Smoke Stopper will save you - that's a bold move Cotton!