SPPS-SBUS PPM PWM Signal Convertor Adapter - Radio-Control Model Manufacturer CN


Product Category
	FPV Racing
	Kit
	PNP
	RTF
	ESC
	Control System
	Buzzer
	Multi-copter
	Frame(KIT)
	Starter ARF
	Advanced ARF
	RTF
	Landing Gear
	Flight Control
	Auto-pilot
	Multi controller
	APM Parts
	GPS Module
	Pixhawk parts
	FPV Combo
	OSD
	Camera/Monitor
	Gimbal Series
	5.8G AV TX/RX
	Antenna
	AV TX/RX
	Airplane
	Kit
	DIY Combo
	RTF
	Flight Controller…
	Spares
	Gas Aircraft
	Propellers
	Helicopter
	Motors
	for Multi-copter
	for Airplane
	for gimbal
	Motor protector
	ESC Series
	High-Speed
	Standard
	Chargers
	Balance Charger
	Meters
	LED Kit
	3S Lipo
	adapter
	1S Charger
	Charge Leads
	Battery Monitor
	LiPO Safety Bag
	Propeller
	Nylon&Plastic
	Carbon Fiber
	Tools
	Multi-Screwdriver…
	Hex Socket
	Toolkit
	Reamer
	Screwdriver
	Pliers
	Scissors
	E-tool
	DIY Tool
	Simulator
	Plug&Wire
	Spares
	LED Kit
	Power Adapter
	Others
	For DJI
	2.4G TX&RX
	Screw/Pillar
	CNC Parts
	Stock Clerance

SPPS-SBUS PPM PWM Signal Convertor Adapter

Description

Product name:SPP-S SBUS PPM PWM Signal Conversion Module Receiver Adapter
Product code:HSM-3085B

Overview:
The high-performance SPP_S converter produced by Jinhang Electronics, the module's wide voltage design supports up to 20V input, and adopts 32-bit single-chip microcomputer to complete signal acquisition, processing and conversion. The stability and speed are far superior to ordinary 8-bit single-chip microcomputer, and the input signal is automatically recognized without manual. Switch, plug and play, status indication is simple and clear, support 8 channels of input / output.

Description:
Brand Name: JHEMCU
Item Name: Signal Converter

Input voltage: 3.3-20V

Current: 15 MA

Dimensions: 26*11 mm

Weight: 2.7g
Channel: 8CH

Input signal:

PPM (CPPM)

PWM (common receiver signal)

SBUS (including R7008SB series, FrSky, etc.)

Features:

Input SBUS signal and output PWM and PPM signals simultaneously

Input PWM signal and simultaneously output PPM and SBUS signals

Input PPM signal and output PWM and SBUS signals simultaneously

Indicator light:

When there is no signal input, the three indicators are all on (PPM green, SBUS blue, PWM red)

The input signal indicator flashes and the output signal indicator is always on.

For example, when the PPM signal is input, the PPM corresponding indicator flashes green, and the PWM red and SBUS blue signal indicators are always on.

Channel description:

1-8 channels are PWM signal input or output channels

SBUS channel is the SBUS signal input or output channel

PPM channel is PPM signal input or output channel

Wiring instructions:

When any one or more channels of the 1-8 channel input PWM signals, the corresponding PPM channel outputs the PPM signal, and the SBUS channel outputs the SBUS signal.

When the PPM channel inputs the PPM signal, it corresponds to the 1-8 channel output PWM signal, and the SBUS channel outputs the SBUS signal.

When the SBUS channel inputs the SBUS signal, it corresponds to the 1-8 channel output PWM signal, and the PPM channel outputs the PPM signal.

Note: the pins are self-welding

Package included:

1 x SPP_S Conversion Module

1 x 4P*2.54MM*3 pin straight needle

1 x 4P*2.54MM*3 pin needles

1 x 3P*2.54MM*2 pin needles

1 x 6P*2.54MM pin straight needle



	SIGLOMAX TECHNOLOGY CO.,LTD

About US About Us Products Support News Contact Us